30Jun 2015

Finite Element Analysis of Warm Deep Drawing Process for Rectangular Cup of AA1100 Aluminum Alloy

  • PG Student, Department of Mechanical Engineering, JNTUH College of Engineering, Kukatpally, Hyderabad, India.
  • Professor, Department of Mechanical Engineering, JNTUH College of Engineering, Kukatpally, Hyderabad, India.
  • Abstract
  • Keywords
  • Cite This Article as
  • Corresponding Author

In this present work, a statistical approach based on Taguchi techniques and finite element analysis were adopted to determine the influence of sheet thickness, temperature, coefficient of friction and strain rate on the formability of cups from AA1100 aluminum alloy using warm deep drawing process. The major control factors which influence the quality of the rectangular cup have been found to be temperature and strain rate of the deep drawing process.

[Thirunagari Srinivas, A. C. Reddy (2015); Finite Element Analysis of Warm Deep Drawing Process for Rectangular Cup of AA1100 Aluminum Alloy Int. J. of Adv. Res. 3 (Jun). 1383-1391] (ISSN 2320-5407). www.journalijar.com

Thirunagari Srinivas

Download Full Paper

Download PDF No. of Downloads: 17 | No. of Views: 60