OBTAINING THE PROTOCOL OF ELIMINATION OF CARBONATES FROM MORROCAN OIL SHALE USING PLACKETT-BURMAN DESIGN
- LIMAT-Thermostructural Materials and Polymers Team, Faculty of science Ben Msik, University Hassan II of Casablanca, Boulevard Cdt Driss Harti, BP.7955, Ben sMsik, Casablanca, Morocco.
- Center of Advanced Materials, EMINES, University Mohammed VI Polytechnic, Lot 660 Hay Moulay Rachid, 43150, Ben Guerir, Morocco.
- Abstract
- Keywords
- References
- Cite This Article as
- Corresponding Author
This work aimed to implement a screening experiment, to study the effects of different processing and formulation factors on the elimination of carbonates from Moroccan oil shale employing Plackett?Burman screening design. Different factors were proposed for study, such as temperature (?C), concentration (mol/l), ratio (s/l), processing time (h), mean particle size (mm), type of acid (CH3COOH, HCl), origin of row material (Tarfaya, Timahdit) and agitation (Yes, No). The quantity of carbonates eliminated was chosen as a response. The results revealed that concentration, ratio, processing time, mean particle size, type of acid and the origin of row material (Tarfaya, Timahdit), showed a significant effect on the quantity of carbonates eliminated, while the temperature and agitation had no effect. The predicted values were in agreement with the experimental values with a coefficient of determination (R2) of 0.99. The model has been validated by experiments subsequent to optimized conditions.
- Abbasi, M. and Habibi, M.M. (2016): Optimization and characterization of Direct Blue 71 removal using nanocomposite of Chitosan-MWCNTs: Central composite design modeling. TAIWAN. INST. CHEM. ENG.,62: 112-121.
- Aboulkas, A. and EL Harfi, K. (2009): Effects of acid treatments on Moroccan Tarfaya oil shale and pyrolysis of oil shale and their kerogen. J. FUEL. CHEM. TECH., 37(6): 659-667.
- Aljariri Alhesan, J. S., Amer, M. W., Marshall, M., Jackson, W. R., Gengenbach, , Qi, Y., Gorbaty, M. L., Cassidy, P. J. and Chaffee, A. L. (2019): A comparison of the NaOH-HCl and HCl-HF methods of extracting kerogen from two different marine oil shales. Fuel., 236: 880?889.
- Amer, M.W., Marshall, M., FEI, Y., JACKSON, W.R., GORBATY, M.L., CASSIDY, P.J. and Chaffee, A.L. (2014): A comparison of the structure and reactivity of five Jordanian oil shales from different locations. , 119: 313-322.
- Attaoui, A. and Belkbir, L. (1992): Pyrolysis and reactivity of Timahdit and Tarfaya (Morocco) oil shales. ALLOY. COMPD, 188: 202?205.
- Chang, Z., CHU, M., Zhang, C., BAI, S., Lin, H. and Ma, L. (2018): Influence of inherent mineral matrix on the product yield and characterization from Huadian oil shale pyrolysis.?JAAP., 130: 269-276.
- Dayana Priyadharshini, S., Bakthavatsalam, A.K. (2016): Optimization of phenol degradation by the microalga Chlorella pyrenoidosa using Plackett?Burman Design and Response Surface Methodology. Bioresour. Technol., 207: 150?156.
- Garba, Z.N., Rahim, A.A. and Bello, B.Z. (2015): Optimization of preparation conditions for activated carbon from Brachystegiaeurycoma seed hulls: A new precursor using central composite design. CHEM. ENG., 3: 2892?2899.
- Ichcho, S.,?Khouya, E.,?Fakhi S., Ezzine, M.,?Hannache, H.,?Pallier, R. and?Naslain, R. (2005): Influence of the experimental conditions on porosity and structure of adsorbents elaborated from Moroccan oil shale of Timahdit by chemical activation. J Hazard Mater., 118(1-3):45-51.
- Karlapudi, A. P., Krupanidhi, S., Rajeswara R.E., Indira, M., Bobby, M.N. and Venkateswarulu, T.C. (2018): Plackett-Burman design for screening of process components and their effects on production of lactase by newly isolated Bacillus sp. VUVD101 strain from Dairy effluent. Beni-Suef University, BASIC. APP. SCI.
- Khouya, E., Hannache, H., Fakhi, S., Ezzine, M., Ichcho, S, Pallie, R., Naslain R. andc.Abb. (2005): Elaboration de nouveau adsorbents activ?s ? partir des schistes bitumineux marocains de tarfaya par activation chimique en milieu sulfurique. PHYS. CHEM. NEWS: 24, 69-75.
- Mohammadzadeh, A., Ramezani, M., Ghaedi, A.M. (2016): Synthesis and characterization of Fe2O3?ZnO?ZnFe2O4/carbon nanocomposite and its application to removal of bromophenol blue dye using ultrasonic assisted method: Optimization by response surface methodology and genetic algorithm. TAIWAN. INST. CHEM. ENG.; 59: 275?284.
- Qian, J. L., Wang, J. Q. and Li, S.Y. (2006): World oil shale. Energy of China., 28(8): 16-19.
- Rahimdokht, M., Pajootan, E. and Arami, M. (2016): Central composite methodology for methylene blue removal by Elaeagnus angustifolia as a novel biosorbent. ENVIRON. CHEM. ENG., 4: 1407?1416.
- Rhazi, N., Hannache, H., Oumam, M., Sesbou, A., Charrier, B., Pizzi, A., Charrier-El Bouhtoury, F. (2015): Green extraction process of tannins obtained from Moroccan Acacia mollissima barks by microwave: Modeling and optimization of the process using the response surface methodology RSM. ARAB J CHEM. doi:10.1016/j.arabjc:04.032.
- Satya, S. M. and Hara, M. J. (2018): Process optimization of butachlor bioremediation by enterobacter cloacae using plackettburman design and response surface methodology. PROCESS SAF ENVIRON., 119:198-206.
- Wang, Q., HOU, Y., WU, W., LIU, Q. and LIU, Z. (2018): The structural characteristics of kerogens in oil shale with different density grades. FUEL., 219: 151-158.
- Zhan, H., Chen, M., K, Zhao., Y, Li., X, Miao., H, Ye., Y, Ma., S, Hao., H, Li., and W, Yue. (2018): The mechanism of the terahertz spectroscopy for oil shale detection. , 161:46-51.
- Zou, C. (2017): Unconventional Petroleum Geology (Second Edition)., 371-389.
[Laila Makouki, Meriem Tarbaoui, Said. Mansouri, Hassan Hannache and Mina Oumam (2020); OBTAINING THE PROTOCOL OF ELIMINATION OF CARBONATES FROM MORROCAN OIL SHALE USING PLACKETT-BURMAN DESIGN Int. J. of Adv. Res. 8 (May). 411-417] (ISSN 2320-5407). www.journalijar.com
1. LIMAT-Thermostructural Materials and Polymers Team, Faculty of science Ben M’sik, University Hassan II of Casablanca, Boulevard Cdt Driss Harti, BP.7955, Ben M'sik, Casablanca, Morocco