15Oct 2019

CHARACTERIZATION OF THE FLOWING BEHAVIOUR OF TWO (2) POLYMETHACRYLATE METHYL DURING IMPLEMENTATION BY EXPERIMENTAL MEASUREMENT OF THE MELT FLOW FLUIDITY INDEX FOR THE RECYCLING OF USED PLASTICS.

  • Mechanical Department - Equipe de Recherche en Mecanique, Ecole Nationale Superieure dIngenieurs (ENSI), University of Lome TOGO, Lome 01BP 1515, TOGO.
  • Departement de Mecanique Appliquee / Institut FEMTO ST, UMR CNRS 6174 - Universite de Franche-Comte, 24 rue de lEpitaphe F-25000 Besancon, France.
Crossref Cited-by Linking logo

  • Abstract
  • Keywords
  • References
  • Cite This Article as
  • Corresponding Author

The present study consists in obtaining rheological data of two polymers from the experimental data obtained from the measurements of their melt indices and using a simple apparatus, the "meltindexer? or ?meltflixer" currently available in the polymers processing industry. The objective of this work is to model the behavior of two (2) polymethacrylate methyl polymers in the process of implementation. The methodology used consists of conducting tests associated with the metrology of the melt flow index (MFI or IF), replacing the standardized conditions of these tests by a selection of masses and adjustable temperatures. The results obtained made it possible to produce rheograms and a characterization of the non-Newtonian and viscofluidifying behavior of the polymers studied. The pseudo-plastic behavior of the selected polymers was determined for which it was determined: - their yield stress, 1. the consistency K 2. their flow index n, 3. and the limit viscosity . From a practical point of view, the lawfulness of these descriptive tests of the polymer for low shear rates [0,1; 10 s-1] applied. danger of indiscriminate dumping of wastes as they affect human health.

  1. AFIO, "Contribution exp?rimentale ? la rh?ologie des polym?res en vue d'applications pratiques, 2001, Th?se, Universit? de Franche Comt? - Besan?on, France
  2. M. DEALY, "Rheometers for molten plastics: a practical guide to testing and property measurement", Ed. Van Nostrand Reinhold Company, 1982.
  3. BELCADIH, "Viscosim?tre, rh?om?tre ou texturom?tre" LABOMAT ESSOR, Instruments & sp?cialit?, juillet 2016, France
  4. M. CHRISTENSEN, "Theory of viscoelasticity - an introduction", Ed. Academic Press, 1982.
  5. A. COVAS & al. Test Apparatus, Rheological measurements along an extruder with an on-line capillary rheometer, Polymer Testing 19 pp: 165?176, 2000
  6. COUARRAZE et J. L. GROSSIORD, "Initiation ? la rh?ologie", Ed. Lavoisier, Tec & Doc, 1991.
  7. J. FREEMAN, C. K. SCHOFF et A. R. COOPER, "Polymers: polymer characterization and analysis. Encyclopedia reprint series", Ed. John Wiley & Sons, Wiley interscience, 1992.
  8. L. LeBLANC, "Rh?ologie exp?rimentale des polym?res ? l'?tat fondu", Ed. Cebedoc, 1974.
  9. E. NIELSEN, "Polymer rheology", Ed. Marcel Dekker Inc, 1977.
  10. J. HUNTER, "Introduction to modern colloid science", Ed. Oxford Science Publications, 1996.
  11. J. AKLONIS et W. J. MACKNIGHT, "Introduction to polymer viscoelasticity", Ed. John Wiley, 1979.
  12. VINH, "Essais dynamiques des mat?riaux visco?lastiques, mesures et interpr?tation", th?se de CESMI - ISMCM St OUEN, 1988
  13. W. EHRENSTEIN et F. MONTAGNE, "Mat?riaux polym?res: structure, propri?t?s et applications", Ed. Hermes sciences, 2000.
  14. BEDA, "Module complexe des mat?riaux visco?lastiques par essais dynamiques sur tiges ; petites et grandes d?formations", th?se de CNAM Paris, 1990
  15. P. TROTIGNON, J. VERDU, A. DOBRAZINSKI, et al., "Pr?cis de mati?res plastiques - Structures, propri?t?s, mise en ?uvre, normalisation", Ed. Nathan, 1998.
  16. MOLLE, "Rh?ologie et visco?lasticit? : principes fondamentaux", Labo-Pharma, probl?mes et techniques, vol. 220, 1973.
  17. O. PEREZ, "Physique et m?canique des polym?res amorphes", Ed. Lavoisier, Techniques et Documentations, 1992.
  18. OUDET, "Polym?res : Structures et propri?t?s - Introduction", Ed. Masson, 1994.
  19. MOUSA, ?Rheological properties of dynamically vulcanized poly (vinyl chloride)/epoxidized natural rubber thermoplastic elastomers: effect of processing variables?, Polymer Testing 19 (Material behaviour),2000
  20. D. FERRY, "Viscoelasticity properties of polymers", Ed. John Wiley, 1980.
  21. MARTIN, "Int?r?t de la d?rivation fractionnaire pour une th?orie unifi?e de la visco?lasticit? des mat?riaux"1999, Th?se, Universit? de Franche Comt? - Besan?on, France.

[Ayarema Afio, Komlan Lolo, Kodjo Attipou, Nour Zerhouni and Sonnou Tiem. (2019); CHARACTERIZATION OF THE FLOWING BEHAVIOUR OF TWO (2) POLYMETHACRYLATE METHYL DURING IMPLEMENTATION BY EXPERIMENTAL MEASUREMENT OF THE MELT FLOW FLUIDITY INDEX FOR THE RECYCLING OF USED PLASTICS. Int. J. of Adv. Res. 7 (Oct). 796-801] (ISSN 2320-5407). www.journalijar.com

A. AFIO
Mechanical Department - Équipe de Recherche en Mécanique, École Nationale Supérieure d’Ingénieurs (ENSI), University of Lomé TOGO, Lomé 01BP 1515, TOGO.

DOI:

Article DOI: 10.21474/IJAR01/9891      
DOI URL: https://dx.doi.org/10.21474/IJAR01/9891

Download Full Paper

Download PDF No. of Downloads: 14 | No. of Views: 52