03Dec 2018

DEVELOPMENT OF POLYMERIC COMPOSITES BY USING REACTIVE MELT BLENDING PROCESS: A MODERN AND ADVANCED TECHNOLOGY.

  • G.N.D. Institute of Technology, Rohini, Delhi-110089 (India).
Crossref Cited-by Linking logo

  • Abstract
  • Keywords
  • References
  • Cite This Article as
  • Corresponding Author

Polymeric hybrid composites consist of the system in which one type of reinforcement is mixed in a different matrix or two or more reinforcements are present in a single polymer matrix. The need of sustainability and green environmental concern leads to the development of hybrid polymeric composites reinforced with one or more reinforcement of nanomaterials and natural fibres. This mixing results with the reduction in water uptake capacity and improvement in mechanical properties. The cost effectiveness and dispersion of nanomaterials with natural fibres are some limiting factors in the development of these advanced composites. The synthesis of polymers based hybrid composites by reactive melt blending technology, using co-rotating twin screw has been developed into a technology of next level.

  1. Report on (2017): An analysis of European Plastics, production, demand and waste. By Europe (The Association of Plastics Manufacturers in Europe) and EPRO (The association of Plastics Recycling and Recovery Organisation).
  2. Crawfor R.J., (1998): Plastic Engineering, Butterworth Heinemann, Oxford U.K.
  3. Uddin N., (2013): Development in Fiber-Reinforced Polymers (FRP) Composites for Civil Engineering , Elsevier
  4. Jawaid M., Abdul Khalil H.P.S., ?Cellulosic/synthetic fiber reinforced composites polymer hybrid composite: A review? Carbohydrate Polymer, 2011, 86, 1-18
  5. Satyanarayana K.G., Arizaga G.G.C., ? Biodegradable composites based on lignocellulosicfibers- An overview?, Prog. Polym. Sci, 2009, 34, 982-1021
  6. Faruk O., Bledzki A.K. Fink H.P., and Sain M.,: ?Biocomposites reinforced with natural fibers: 2000-2010?. Progress in Polym Sci., 2012, 37, 1552-1596
  7. Dittenber D.B., Ganga Rao H.V.S, ?Critical review of recent publication on use of natural fibres composites in infrastructure?, Composite A Appl. Sci. Manuf, 2012, 43, 1419-29
  8. Sarifuddin N., Ismail H., and Ahmad S.: ?Effect of Fibre loading on properties of thermoplastic sago starch/ kenaf core fibrebiocomposites?. BioResources, 2012, 7(3), 4294-4306
  9. Bella G.D., Fiore V., Galtieri G., Borsellino C.,? and Valenza A., ?Effects of natural fibers reinforcement in lime plasters (kenaf and sislvs Polypropylene?. Construction and Building Materials, 2014, 58, 159-165.
  10. Arrakhiz F.Z., Achaby M.E., Malha M.,: ?Mechanical and thermal properties of natural fibers reinforced polymer composites: doum/low density polyethylene?. 2013, 43, 200-205
  11. Dahlke B., Larbig H., Scherzer H.D., PoltrockR.,:?Natural Fiber reinforced foams based on renewable resources for automotive interior application?. J. Cell. Plast. 1998,34, 361-379
  12. Adeosun Sunday. O., Lawal G. I. ,BalogunSambo. A.: ?Review of Green Polymers Nanocomposites? Journal of Minerals and Materials Characterization & Engineering, 2012, 11, 4, 483-514
  13. Azeredo De, (2009): ?Nanocomposites for food packaging applications?. Fppd Res. Int., 2009,42, 1240-1253
  14. Schalder L.S., Brinson L.C., Sawyer W.G.,: ?Polymer Nanocomposites: A small part of the stroy?. JOM, 2007,59, 53-60
  15. Aftab A., Bajwa G.S., Ranganath M.S., Mishra R.S., ?Recent Development in Polymeric Hybrid Composites: Opportunities and Challenges?,Proceedings of ICAPIE 2017, 154
  16. Aftab A., Bajwa G.S., Gupta A.P., Ranganath M.S., ?Biomaterial Incorporated PolyolefinsNanocomposite: Opportunities in the Automotive Sector?, Proceedings of ICAPIE 2016, 424
  17. John M., Thomas S.,: ?Biofibers and biocomposites.? Carbohydr. Polymer,2008.71, 343-364.
  18. Saba N., Md. Tahir P., Mohd. Jawaid,: ?A Review on Potentiality of Nano Filler/Natural Fiber Filled Polymer Hybrid Composites.?, Polymers, 2014,6, 2247-2273
  19. Kalia S., Kaith B., Kaur I., ?Pre-treatments of natural fibres and their application as reinforcing material in polymer composites- A review? Polym. Eng. Sci, 2009, 49, 1253-72
  20. Mishra S., Mohanty A., Drzal L., Misra M., Parija S., Nayak S., Tripathy S., ?Studies on mechanical performance of biofibre/glass reinforced polyester hybrid composites? Composite Sci Technol., 2003, 63, 1377-85
  21. Modern Plastics Encyclopedia handbook, Mcgraw Hill, 1994.

[Aftab Alam. (2018); DEVELOPMENT OF POLYMERIC COMPOSITES BY USING REACTIVE MELT BLENDING PROCESS: A MODERN AND ADVANCED TECHNOLOGY. Int. J. of Adv. Res. 6 (Dec). 478-483] (ISSN 2320-5407). www.journalijar.com

Aftab Alam
G.N. D. Institute of Technology, Sector 15, Rohini, Delhi

DOI:

Article DOI: 10.21474/IJAR01/8161      
DOI URL: https://dx.doi.org/10.21474/IJAR01/8161

Download Full Paper

Download PDF No. of Downloads: 25 | No. of Views: 72