DETERMINATION OF PRODUCT LIFE CYCLE THROUGH THE SELECTION OF BEST GEAR MATERIAL BY THE TECHNIQUE FOR ORDER PREFERENCE BY SIMILARITY TO IDEAL SOLUTION.
- Abstract
- Keywords
- References
- Cite This Article as
- Corresponding Author
Materials and process selection are key issues in optimal design of industrial products. Substituting and selecting materials for different machining parts is relatively common and often. Material selection is a difficult and subtle task, due to the immense number of different available materials. From this point of view paper deal with a set of major gear design criteria which are used for gear material selection. The paper introduces the decision models for best selective material processes. These models are explored in terms of fatigue theory as well as product life cycle is explained and their optimization problems are discussed analytically. The fatigue life of product merged on the best selection of material for better product development, considering economic aspect of present situation. In this book, the writer dives deeper into optimization technique to find out product life.
- Ashby, M.F.: Multi-objective optimization in material design and selection. Acta Mater. 48(1), 359?369
- Ashby, M.F.: Materials Selection in Mechanical Design. Elsevier, Boston (2005)
- Collette, Y., Siarry, P.: Multiobjective Optimization. Springer-Verlag, New York (2003)
- Dehghan-Manshadi, B., Mahmudi, H., Abedian, A., Mahmudi,R.: A novel method for materials selection in mechanical design: Combination of non-linear normalization and a modified digital logic method. Mater. Des. 28(1), 8?15 (2007)
- Milani, A.S., Shanian, A., Madoliat, R., Nemes, J.A.: The effect of normalization norms in multiple attribute decision making models: a case study in gear material selection.Struct. Multidisciplinary Optim. 29, 312?318 (2005)
- BRECHT, Y. et al., Challenges in materials and process selection, Progress in materials Science 46 (2001), p. 407-428
- SHANIAN, A., SAVADOGO, O., A material selection model based on the concept of multiple attribute decision making, Material in Design,27(2006), p. 329-337
- GLIGORIJEVIĆ R., Materials for gears manufacturing, their dynamic and structuralcharacterisics and heat- tretment, Journal of terotchnology, V.5, No.6, 1976, p367-379
- MILANI A., SHANIAN, A., Gear material selection with uncertain and incomplete data,Journal of Mechanics and Material in Design, 3(2006), p. 209- 222
- JUVINALL, C., MARSHEK,M., Fundamentals of Machine Component Design, Wiley, New.
[Prithwiraj Jana. (2017); DETERMINATION OF PRODUCT LIFE CYCLE THROUGH THE SELECTION OF BEST GEAR MATERIAL BY THE TECHNIQUE FOR ORDER PREFERENCE BY SIMILARITY TO IDEAL SOLUTION. Int. J. of Adv. Res. 5 (Jun). 1038-1046] (ISSN 2320-5407). www.journalijar.com
