30Sep 2016

FINITE ELEMENT SIMULATION OF TEMPERATURE AND CURRENT DISTRIBUTIONS DURING SPARK PLASMA SINTERING (SPS).

  • Department of Energy Engineering, National Engineering School of Monastir, University of Monastir, 5019 Monastir, Tunisia.
  • Mechanical Engineering Department, Faculty of Engineering, King Khalid university, Abha, KSA.
Crossref Cited-by Linking logo

  • Abstract
  • Keywords
  • Cite This Article as
  • Corresponding Author

A finite element model is elaborated to simulate coupling of thermal and electrical behavior of Spark Plasma Sintering (SPS). the temperature and the current distributions were analysed in the case of two sample materials widely differing electrical conductivities (alumina and titanium aluminide) with thermal properties and electrical temperature-dependent.

[Souhir Mankai, Jamel Madiouli and Jalila Sghaier. (2016); FINITE ELEMENT SIMULATION OF TEMPERATURE AND CURRENT DISTRIBUTIONS DURING SPARK PLASMA SINTERING (SPS). Int. J. of Adv. Res. 4 (Sep). 1609-1614] (ISSN 2320-5407). www.journalijar.com

souhirmankai@yahoo.fr

DOI:

Article DOI: 10.21474/IJAR01/1617      
DOI URL: https://dx.doi.org/10.21474/IJAR01/1617

Download Full Paper

Download PDF No. of Downloads: 31 | No. of Views: 106